Articles

  • 32nd IEEE APS/MTTS Symposium – October 5th, 2017

    THE INSTITUTE OF ELECTRICAL AND ELECTRONIC ENGINEERS, INC. NORTH JERSEY SECTION MTT-Society & AP-Society Joint Chapter PRESENTS: 32nd ANNUAL SYMPOSIUM AND MINI-SHOW FOCUS: SELECTED TOPICS IN RF AND MICROWAVE TECHNOLOGIES FOR COMMERCIAL AND MILITARY APPLICATIONS DATE: THURSDAY OCTOBER 5, 2017 PLACE: Hanover Manor, 16 Eagle Rock Ave., E. Hanover, NJ 07936. PHONE: 973-992-7425

  • Connecting Portable RF Enclosures to Detachable Shielded Floors

    When equipment may be too heavy, sensitive or cumbersome, the use of a temporary, flexible enclosure attached to an existing or assembled ground plane can provide shielding to meet test standards that need -85dB in shielding performance from 30 MHz to 18GHz depending on the enclosure’s construction and filter options. The highly conductive portable system […]

  • Taking RF / EM Designs in New Directions

    Often, one design leads to innovations in other areas. Select Fabricators has successfully taken one of its patented designs for the forensics industry and applied it’s principles with great success to wireless technologies testing. Select Fabricators has been able to use its techniques for EM / RF shielding and isolation to design and fabricate wireless […]

  • New Modular RF EMI Enclosure Design

    New, semi-permanent, large scale EMI / RF test enclosure system Select Fabricators, Inc. was presented with a new design challenge in 2015, to build a test enclosure under Mil-Std. 461G-Appendix A that is moveable, lower in cost and weight than a permanent welded shielded chamber, and easy to install.  SFi succeeded in designing a semi-permanent system […]

  • Specialized EM / RF Shielding Test Enclosure Designs

    Vehicle Exhaust, Outdoor Environment, Fire Retardant and Work Center Testing Applications Flexible, portable, high attenuation EM RF shielded environments are in demand for many testing applications. Vehicles of all sizes, can be tested in a RFI / EMI screen rooms with proper intake and exhaust systems. Mobile outdoor RF isolation testing tents can be assembled […]

  • Compatibility in the Capital

    Join Select Fabricators in Ottawa, Ontario, Canada this July and meet with Dan and Brian. They will be in Booth #122. The 2016 IEEE International Symposium on Electromagnetic Compatibility, sponsored by the IEEE EMC Society is the must-attend event for EMC engineers of all levels and specialties. The IEEE EMC Symposium provides knowledge and tools […]